Archive for the ‘Photo editing tutorials’ Category

You ever wonder how the TIME magazine cover is created?.Although most of the professional designers use Illustrator, this opportunity I’ll show you how to obtain the same amazing  results using Photoshop CS4.
Here is the image I’ll use for this tutorial.

Here is the final image we’ll have done after finishing this tutorial:

Note:The use of TIME magazine logo on this tutorial is just for instructional purposes and not intended to violate the magazine copyrights.

Step 1: First at all we need to crop the original picture

The image is a little bigger for our purpose  therefore we need to crop it so we can have a nice portrait image suitable for our  magazine cover.

You can crop an image using the Crop tool  located in the tools bar section. Select the crop tool and in the options bar set the width to 500px and the height to 613px:

With the Crop tool selected Drag over the part of the image you want to keep to create a marquee.It’s is not necessary to be precise, we can fix later.If you need to move the marquee just click inside and drag over to the right or left until the marquee is in the desired position.

When our marquee selection is in the desire position press Enter to crop our image and now we have a nice pic to work with.

Because this picture is nice and clean we don’t have to worry about retouching, so let’s focus on the magazine design and typography.

Step 2: Create the red edges around the magazine cover.

There are many ways to create the red border around our cover, but I want to show you an easy and painless way to do it.

Set the foreground color to red:

Select the Rectangular marquee tool from the tools bar and make a selection approximately 5 pixels from picture borders as shown below:

To make a marquee selection can be a little tricky if you are a beginner so I recommend to use the Rule as guide. To make the Rule visible go to the menu bar and click on view and then in the drop down menu click on Rules and the rule will show up around your work stage.

You’ll see like marching ants in your image, now go to the Menu bar ,click on Select menu and in the drop down menu click on Inverse:

Now the photograph will look like the image below:

With the inverse selection press ALT + Backspace to fill the selection with red color ( make sure the foreground color is set to Red) and there we have the red edges around the cover! sweet isn’t it?. Press Ctrl + D lo deselect the marquee.

Now we are ready to move on and fill our image with some Text.

Step 3: Adding text to the image

Select the text tool, set the font type to trajanus brick, in case you don’t have this font type in your computer you can download for free from: http://www.sostars.com/trajanus-bricks-font,although this font is not the same as the used in Time’s magazine, it is pretty close for our purpose in this tutorial.

Type the word TIME and then go to Window menu, select character and set the following values in your character window :

Make sure to select your font color to red.

Now that we have our Time text we need to fix something; you may noticed that there is too much space between the letter T and the I, let’s fix it. I’ll show a trick to solve this situation that you can use it in some others projects where you need to apply special effects to a single text character.In your layers panel right click in your text layer and from the menu select rasterize now select the rectangular marquee to draw a selection on the letter T , now with the right arrow in our keyboard click a few times to put the letter T in place close to the I, press Ctrl+D to clear the selection, now you have your TIME text ready to put in place, just click in the move tool and put in the position as shown in the final image above.

Step 4 Add the rounded rectangle shape

From our tool bar menu select the rounded rectangle tool and draw a shape similar to the one we have in our final image, make sure your foreground color is set to black, now that we have our shape double click in the shape layer and select stroke from the layer style window and set the following values:

Now we are ready to put some text in our shape.

Select the text tool make sure your foreground color is set to white, and type your text, in this case PERSON ON THE YEAR, and from the window menu select character and set the following values:

Just place your text inside the shape.

For the other text in our magazine I used Times New Roman font, white, bold.set the appropriate size and type any text you want.

Step 5 Adding barcode image:

Finally you can add a barcode image, get one from google or use the image above, resize it if necessary and put in place, and you have your TIME magazine front cover ready for publishing.

Our final front cover magazine


Read Full Post »

In this tutorial I will show you how easily you can improve someone’s skin in a photo without blurring out important image details, such as the person’s eyes and mouth . in this case I’m going to use a photo that I needed to do some work before I used it to create a magazine front cover (Vanidades en español).

Here’s the image I’ll be working with in this tutorial.

The original picture

It’s a nice photo, but it would probably look even better if we softened her skin a little. Here’s how she’ll look like when we’re done with this tutorial,big difference ah?

The final image result with a fresh nice looking skin and green eyes

Step 1: Duplicate The Background Layer

With my image newly opened in Photoshop, I can see in my Layers palette that I currently have one layer, the Background layer, which contains my original image.Now, create a copy of your background image , to do that  use the keyboard shortcut Ctrl+J (Win) / Command+J Mac).If I look again in my Layers palette, I can see that I now have the copy, which Photoshop has automatically named “Layer 1”, above the original Background layer:

Step 2: Change The Blend Mode Of “Layer 1” to “Overlay”

With “Layer 1” selected in the Layers palette (the currently selected layer is highlighted in blue), go up to the layer blend mode option in the top left corner of the Layers palette. It’s the drop-down box that’s currently set to “Normal”. Click on the small down-pointing arrow to the right of the word “Normal”, which brings up a list of all the different layer blend modes we have to choose from, and select Overlay from the list:

As soon as you change the blend mode to Overlay, you’ll see a big increase in contrast and color saturation in your image:

Step 3: Apply The “High Pass” Filter To “Layer 1”

To smooth and soften the woman’s skin, we’re going to use Photoshop’s High Pass filter. To access the High Pass filter, make sure you still have “Layer 1” selected, then go up to the Filter menu at the top of the screen, choose Other down near the bottom of the list, and then select High Pass:

This brings up the High Pass filter’s dialog box, which is made up of a large preview area and a single option, Radius, down at the bottom. The High Pass filter looks for details in an image, such as the edges around people, objects, and so on. The reason why it’s so effective at image sharpening is because it allows us to sharpen only the edges in an image while leaving everything else untouched.

To do that, begin dragging the slider at the bottom of the dialog box to the right until you have your Radius value set to somewhere around  4 or 5 pixels. If you’re using a high resolution image, try a higher setting somewhere around 9-10 pixels. As you drag the slider towards the right, if you keep an eye on the preview area in the dialog box, you’ll see more and more areas of the image become affected by the filter, starting with only the finest details and then gradually expanding to include more and more of the photo. If we were sharpening the image, we would want to stick to a very low Radius value to target only the edges themselves, but for our softening effect, we need to go a bit higher:

Click OK when you’re done to exit out of the dialog box. If I look at my image now in the document window, it looks like I’ve gone way too far with my image sharpening.

Step 4: Invert “Layer 1”

So far, we’ve used the High Pass filter to sharpen all the edge details in the image, but what we really want to do is smooth and soften everything that is not an edge detail, like the woman’s skin. In other words, we want the opposite of what we currently have. We want to soften all the non-detail areas while leaving the edges alone. To do that, all we need to do is invert the layer!

With “Layer 1” still selected, go up to the Image menu at the top of the screen, choose Adjustments, and then choose Invert, or for a faster way, use the keyboard shortcut Ctrl+I (Win) / Command+I (Mac):

Once you’ve inverted “Layer 1”, take a look at your image in the document window. A moment ago, the image was suffering from an extreme amount of sharpening, but now everything appears soft and blurred-out. That is, everything except the important details in the image. The woman’s eyes and mouth are slightly blurred out, but nowhere near the extent of her skin:

Step 5: Lower The Opacity Of “Layer 1” To Fine-Tune The Amount Of Skin Softening

We need to do is lower the opacity of “Layer 1”. Go up to the Opacity option in the top right corner of the Layers palette. You’ll see the word “Opacity” and that it’s currently set to a full 100%. Click on the right-pointing arrow, which brings up a small slider bar, and simply lower the opacity of “Layer 1” until the smoothing looks more natural. There’s no set amount to lower it to since it will depend on your image, so just keep an eye on your image in the document window as you drag the slider. I’m going to lower my opacity down to about 80%,your value may be different.

Step 6: Add A Layer Mask To “Layer 1”

To completely remove any softening from the important details in the woman’s face, I’ll need to use a layer mask. To add a layer mask, again make sure “Layer 1” is selected and then click on the Layer Mask icon at the bottom of the Layers palette:

Step 7: Select The Brush Tool

We’re going to paint on the layer mask, and for that, we need the Brush Tool, so either grab it from the Tools palette or press the letter B on your keyboard to select it with the keyboard shortcut:

Step 8: Set Your Foreground Color To Black

Since we need to paint with black, we’ll need to set our Foreground color to black, since the Brush Tool paints with whichever color we have our Foreground color currently set to. By default, whenever we have a layer mask selected (which we currently do), Photoshop sets the Foreground color to white, while setting the Background color to black. We can easily swap them by pressing the letter X on the keyboard. As we can see in the Foreground and Background color swatches near the bottom of the Tools palette, we now have black as our Foreground color (the top left square) and white has become our Background color (bottom right square):

Step 9: Paint Over The Details In The Face To Hide The Softening Effect

With our Brush Tool selected and black as our Foreground color, we can now paint away the softening effect over any areas where we don’t want it. Painting with black on the layer mask doesn’t actually “remove” the effect, it simply hides it from view. If we change our minds later and want to bring the effect back in areas where we’ve hidden it, all we’d need to do is paint with white over those areas to reveal the effect once again.

Using a small, soft-edged brush, I’ll paint over the woman’s eyes and mouth to completely hide the softening effect from those areas. You can change the size of your brush at any time by pressing the left bracket key on your keyboard to make the brush smaller or the right bracket key to make it larger.

I’ll continue painting away any softening effect over her mouth, and maybe over the bottom of her nose and her eyebrows as well. If we look at the layer mask thumbnail, we can see all the areas where I’ve painted with black:

Step 10: Paint Away The Effect From The Rest Of The Image

As I mentioned a moment ago, you don’t have to limit the softening effect to only the skin if you like how the effect looks when applied to the entire photo. But if you do want to limit the softening and smoothing to just the person’s skin, simply use your Brush Tool and with black still as your Foreground color, paint over everything in the photo except for the person’s skin.

To walk an extra mile on this tutorial, you can retouch the image eyes, select from color picker the following values:

Select a soft brush and set the opacity from 12 to 20% and apply the brush over the image’s eyes setting the appropriate size for the brush and that’s it.

Here is the final image of the magazine front cover! Typography is another tutorial that later on I’ll show you how to select the right colors and fonts to create amazing magazines covers!!

Read Full Post »